What Is Liquid Nails Adhesive Used For

Home Projects Repair High Temperature Adhesive

Key Features

Withstands temperatures from -60° to 300°F
Acid free / Low odour
Flexible & shock absorbing
Works on wet surfaces
Indoor & outdoor
Patented engineering science
Tin fill gaps up to one/iv" (6mm)
Contributes to LEED® certification
GREENGUARD Children & SchoolsSM Certification
Contributes toward NAHB National Green Edifice Standard™ certification of the structure

Recommended For:

fabric, woods, metal, leather, ceramic, foam, prophylactic, canvas, stone, paper-thin, brick, marble, concrete, plastics.*
*Will non bond polyethylene or polypropylene.

NOT Recommended For:

canvas goods, wood flooring, aquariums or other underwater applications.

Available Sizes

0.75 fl. oz. clasp tube

Coverage

0.75 fl. oz. squeeze tube covers 9 lineal ft.

Max VOC

52 GPL

Surface Preparation

Surfaces must be clean and free from any loose matter before applying this loftier temperature adhesive. Surfaces may be damp. Utilise this loftier temperature agglutinative to i surface. For faster bonding, dampen surfaces lightly with water before applying the high temperature adhesive.

Full general Application

Printing surfaces together within v minutes afterwards applying this high temperature agglutinative. For amend tackiness, pull surfaces back apart for iii-v minutes, and then rejoin. Surfaces may exist adjusted for ten minutes afterwards joining. This high temperature adhesive volition reach initial cure in one hour and full cure in half-dozen-viii hours.

Sealing A Tear

If ends cannot be overlapped, then lay ends equally close together as possible. Lay a bead of high temperature adhesive over unabridged tear and a little past each finish. Smooth the bead of high temperature adhesive so that it forms a sparse film on both sides of tear. Wipe away excess high temperature adhesive with a dry cloth.

Bonding Pieces Cease-to-End

Find a suitable piece to utilize as a "splint" to reinforce the repaired joint. Apply loftier temperature agglutinative to the splint over the surface area that will be in contact with the repaired piece. Apply loftier temperature adhesive to both ends of joint. Bring together all pieces together as desired and caryatid or clamp.

Plastics, Metals, and Non-Porous Surfaces

Plastics, metals, and not-porous surfaces that can be bonded with this loftier temperature adhesive include aluminum, steel, brass, PVC, fiberglass, rubber, neoprene, nylon, ABS, and polystyrene. Dwelling house PROJECTS cannot be used to bond polyethylene or polypropylene. Apply a dewdrop of high temperature adhesive to i of the surfaces to be bonded. Spread the bead of high temperature adhesive to cover the surface to exist bonded. Join the surfaces together, then pull them autonomously and let stand for v minutes earlier pressing back together. For a quicker bond, mist the surfaces lightly with water before rejoining. Let 1 hour before lite apply and 8 hours before normal use.

Cleanup

If this loftier temperature adhesive is moisture, wipe it away with a clean textile. If the high temperature agglutinative has dried, scrape information technology away.

Storage

Learn how to keep your adhesive fresh for adjacent time.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Toll and detail availability may vary.

Source: https://www.liquidnails.ca/en/products/high-temperature-adhesive-LN201-2

Posted by: daughtrypripe2001.blogspot.com